Home > News > Content

1.2mm-3.2mm TIG Welding Wire Storage And Transportation Issues Should Be Noted

Jun 23, 2017

1.2mm-3.2mm TIG Welding Wire storage and transportation issues should be noted
1.2mm-3.2mm TIG wire is simply used in the metal welding process for the conductive or filled wire welding materials because welding is the industrial production, especially in the metal processing process, one of the most common process, so 1.2mm -3.2mm TIG welding wire in the industrial production is also very wide range of this welding metal can not only be used to make metal stamping die and knives, etc., in the metal product repair time, the use of this material is also very Because the manufacturers in the 1.2mm-3.2mm TIG wire purchase often choose to buy in batches, so buy a good metal transport and storage work is very necessary in the wire transport, the staff should be To avoid it and corrosive substances placed together, while in the transport of the relevant personnel also need to do a good job of waterproofing and rain. Test transformer manufacturers related staff said that in the storage of 1.2mm-3.2mm TIG wire when staff need to pay attention to place it in a dry and ventilated warehouse.
In the case of metal welding, 1.2mm-3.2mm TIG Welding Wire and flux are often indispensable.For welding operators, if you want to ensure the welding effect, then according to the different properties of welding metal to choose the appropriate flux is Indispensable. Among the many fluxes, deoxidizers and nitrogen removal agents are the most common types of welds because the presence of nitrogen and oxygen during the welding process will cause the weld metal to be stomatal or brittle, So the staff must be in the process of welding to add some nitrogen removal agent and oxygen scavenger to avoid the occurrence of the situation.If the need to use the welding process is self-protection core 1.2mm-3.2mm TIG wire, then the flux The addition of AL to the addition of nitrogen. Slag forming agent is another kind of welding additives, common slag forming agent calcium, potassium and sodium and so on elements. Ductile iron pipe manufacturer said that these slag additives can be added to reduce the probability of contamination of the weld pool during the welding process, such that addition of such additives can also be obtained appearance welding lifting props.
In order to ensure the quality of welding, there are many types of 1.2mm-3.2mm TIG wire in the market, we need to use different materials when welding different products. Then we choose 1.2mm-3.2mm TIG Welding Wire when the need to pay attention to what, the following is to give you about. First is the 1.2mm-3.2mm TIG wire material selection, the market production 1.2mm-3.2mm TIG wire material there are many, we have to meet Of the welding quality to select the appropriate material, because the heat-resistant steel series of 1.2mm-3.2mm TIG Welding Wire and stainless steel gas protection welding 1.2mm-3.2mm TIG Welding Wire is not the same place, we must pay attention Material selection. Second is the welding process to determine, is the so-called different 1.2mm-3.2mm TIG wire to use a different way, so we must pay attention to the welding when the welding method of choice.In addition to these, lift manufacturers told us, We want to ensure the use of 1.2mm-3.2mm TIG welding, we use the usual process, we need to protect material, so as to ensure the preservation of the quality 1.2mm-3.2mm TIG Welding Wire, from the use of What problem does not exist.